250 LPH RO Plant

250 LPH RO Plant

200% MONEY BACK GUARANTEE

If RO is not purifying safe and Pure water .

250 LPH RO Plant                          

  Plant Design Basis and Conditions :

•         We have designed this system to produce permeate flow 250 Liters per hour.

Maximum TDS Level of Raw Water (input) upto 2500 ppm.

•         The treated water quality as required i.e pH 7-8 after correction ,TDS <100 PPM & Hardness < 50 PPM can be achieve , subject to the feed water quality is the same as specified above .In case of any change in the quality of raw water it may have implication on operating parameters or on end results of the system.

•         The system of recovery is properly maintained corresponding to the raw water TDS.

•         RO feed water limiting conditions as mentioned below are strictly maintained,



Parameter

Results

Turbidity

< 1 NTU

Free Chloride

Nil

Oil & Grease

Nil

Iron

<0.1 PPM

SDI

<4.0

Temperature

< 45 degree C









                                                SCOPE OF SUPPLY


S.No

Description

Make

Qty

Remaks

1

Raw Water Pump

Kirloskar

1 No

Capacity 1 m3

2

Sand  Filter

Aventura  or Pentair

1 No

H 1200 MM & Dia 250 MM Flow Rate 1500 Liter per hour

3

Carbon Filter

Aventura or Pentair

1 No

H 1200 MM & Dia 250 MM Flow Rate 1500 Liter per hour

4

Anti-scalent Dosing System

E doze

1 Set

Capacity 0-06 LPH

5

Micon Filter Hsg

20” Big Blue

Imported

2 Nos

20” Big Blue with 4” Dia

6

Micron Filter


2 Nos

20” * 2” Dia

7

High Pressure Pump

Sumo/ Nangfang/CRI 

1 No

Capacity 1 M3

8

Membrane

Film Tech/ Hydronautics / Torrey

1 No

Size 4” * 40”

9

Membrane Hsg

Water Life

1 No

1 Elements in Hsg

10

C I P System

Sharp/KBL

1 Set

 Optional at extra cost

11

Electric Control Panel

LED Base

1 Set


12

Flow Meters

Flow Star/ UKL

2 Nos


13

Pressure Switches

Denfoss

Or Equ.

2 Nos

Low & High Pressure

14

Pressure Gauges

H Guru

2 Nos


15

Pipe Fittings


1 Lot

Upvc  all over

16

R O Skit


1 No

MS fabricated with epoxy paint or SS 202

17

Online Conductivity

Meter

Aster

1 No

For Measuring On line Conductivity

Optional at extra cost








   



TECHNICAL SPECIFICATIONS



Flow Rate


Treated Water           :           250 LPH  based on TDS level upto 2500 PPM



1     Raw Water Pump        


                  Specifications

Ø  Horizontal Centrifugal

Ø  Power Required : 0.5  HP

Ø  Make : Kirloskar & Eqv.

Ø  Quantity : 1 No


2     MEDIA FILTER

                Specifications

Ø  Make : Pentair / Aventura  

Ø  Material of Construction : FRP

Ø  Dia & Length : 10*54  

Ø  Testing Pressure :6 Kg/cm2

Ø  Opening : Top

Ø  Quantity : 1 No

Ø  Valve : Multiport Type Lever Type

Ø  Size : ¾  Inch

Ø  Maximum Flow : 2000 LPH

Ø  Media : Gravel, Pebbles ,Quartz Sand ,Anthracite etc.



3     CARBON FILTER

                  Specifications

Ø  Make : Pentair / Aventura  

Ø  Material of Construction : FRP 10*54

Ø  Testing Pressure :6 Kg/cm2

Ø  Opening :  Top

Ø  Quantity : 1 No

Ø  Valve : Multiport type, Lever tpye

Ø  Size : ¾  Inch

Ø  Maximum Flow : 2000 LPH

Ø  Carbon : Acid wash with 1100 + ID valve



4     MICRON FILTER


Specifications               Cartridge Filter & Housing

                                        

Big Blue Housing :

Ø  Make : Imported  in PP

Ø  Length & Diameter : 20”*4”

Ø  Quantity : 2 Nos


Cartridge :

Ø  Make Ametek USA in PP

Ø  Length : 20”

Ø  Micron Rating : 05 Micron

Ø  Quantity : 2 Nos

5     DOSING SYSTEM                  

Specifications                         

Ø  MOC: PP

Ø  Capacity : 06 LPH

Ø  Pressure : 10 psig

Ø  Qty : 1 No

Ø  MAKE : E DOZE



6     HIGH PRESSURE PUMP


Specifications

Ø  MOC : Stainless Steel

Ø  Type : Vertical

Ø  Flow Rate : 1 M3

Ø  Power Required : 1 Phase ,1.1 Kw

Ø  Make : Sumo/CRI/Nangfang


7     RO MEMBRANE         

SPECIFICATIONS

Ø  Type : Spiral Wounded

Ø  Dia.& Length :  40*40

Ø  No membrane : 1 No   

Ø  Recovery : Approx  30 %

Ø  Make of membrane : Dow/ Hydranautics

Ø  Salt rejection : 95-98 %



8     RO PRESSURE TUBE

SPECIFICATIONS

Ø  MOC : FRP  Composite

Ø  Pressure Vessels :  1 No

Ø  No of membrane per vessel : 1 No

Ø  Make : Water Life


9     C I P SYSTEM  ( Optional at Extra cost )

      Specification

Ø  With R W Pump & FRP Tank : 1 No , 100 Liter



10  ELECTRICAL PANAL

SPECIFICATIONS

Ø  Complete starters, overload relays , single phase prevention for pump.

Ø  Voltmeter , Ammeter , MCB’s , indicating  lights

Ø  Push buttons

Ø  Rocker Switches for Dozers

Ø  Incomers, Auto- Manual Switches


11  INSTRUMENTATION

Specifications                         

Ø  Rota Meter : 2 nos (permeate & Reject line )

Ø  Make : Flowstar , Vats

Ø  Digital TDS/ Conductivity Meter  1 no at extra cost  

Ø  Make : Vats India

Ø  Pressure Switch : 2 Nos

Ø  Make : Indfoss/Denfoss

Ø  Pressure Gauges : 2 Nos

Ø  Make : Gluck/ Guru


12  PLUMBING & FITTING


Ø  Pipelines upvc  

Ø  NRV’s pressure relief valves , where needed .

Ø  The system with be on common MS base frame  or  SS as per Direction of Client.




FINANCIAL OFFER


           

Product Specification

Qty

Unit Price

Amount

Supply and Installation of Complete Reverse Osmosis System  Capacity 250 LPH


01

1,00,000.00





1,00,000.00



  

                                                           


PACKING

Not Reqd

FREIGHT & INSURANCE

As per actual  (Max Rs 1500/ for Gurgaon )

ERECTION & COMMISSIONING

Include

SALES TAX

 As per Norms  ( VAT 12.5 %  or CST 2 % against form C )




TERMS AND CONDITION


The following terms and conditions shall apply to this order.


Payment

 50 % advance along with purchase order  40 % against Performa invoice before delivery.Bal 10 % after Erection & Commissioning.


Validity

 This offer is valid for next updating from the date of price.


Warranty

12 months from the date of delivery / installation . Consumable Like chemical and filters will be on chargeable basis during warranty period.


Sales TaxesExtra

As per sale Tax Norms ( Vat  @ 12.5 %  or 2 % against form C )


Testing / Inspection

 Any charges for inspection / testing would be on the client' account.


Facilities at site

 The buyer at his cost shall arrange the following facilities at site available.


The requisite utilities, manpower and raw materials should be available at the time of installation and commissioning.


All other terms and conditions shall be discussed and agreed / finalization mutually at the time of agreement.


 EXCLUSIONS

  

The following are specifically excluded from our scope of work:



Ø  All process inputs, utilities such as tube well for water, power supply and distribution system, inlet –outlet-piping ete.


Ø  Fire Fighting Equipment.


Ø  All civil works including building, shed, foundations, roads, ramps, storage tanks etc


Ø  Warehousing, storage and safe custody of equipment and other plant items received at site.

Write a review

Note: HTML is not translated!
    Bad           Good

Free Shipping

This product qualifies for Free Shipping

  • Views: 83
  • Product Code: 250 LPH RO Plant
  • Availability: In Stock
0 Product(s) Sold
  • ₹99,990
  • Ex Tax: ₹99,990

Tags: 250 LPH RO Plant